Icom IC-M127

6 SET MODE
© Voice scrambler code
This item appears only when an op-
tional UT-98 VOICE SCRAMBLER UNIT iS
installed.
When communicating using the voice
scrambler function, remember that all
members of your group must have the
scrambler function ON, and the same
scramble code set.
roa |
SCRAMBLER
Code set to 127"
SCRAMBLER
Code set to ‘0’
© DSC acknowledgement
method
This item appears only when an op-
tional UX-130 osc unit is installed.
This item sets the acknowledgment
method for replies to a calling station
when receiving an individual call (see
Pgs.13, 16, 19 and 20 for details con-
cerning individual calls).
Full auto: tran-
fc A sceiver automati-
cally replies to
ACK DSC calis
‘Semi auto: you
a
reply; however,
ACK when no opera-
tion is performed,
an “unable to
comply” is au-
tomatically sent
1 Manual: you must
g manually reply to
L calls
ACK
© Auto acknowledge contents
This item appears only when an op-
tional UX-130 psc unit is installed and
full automatic (FA) is selected (see left).
This item only appears when full auto-
matic (FA) is selected in the previous
item and sets “unable to comply” or
“able to comply” as the full automatic
acknowledgement transmission (left).
AUTO ACK
“Able to comply” message
is sent when receiving an
individual call
Ur
u
AUTO ACK
“Unable to comply" message
is sent when receiving an
individual call