Icom IC-M23

■ Set mode programming
The Set mode is used to change the settings of transceiver's
functions: Beep Tone function, Priority Scan function*, Scan
resume timer*, Auto Scan function*, Dual/Tri-watch function*,
Monitor key action, Automatic backlighting, LCD contrast
setting and Power Save function.
*Not available with Holland version.
D Set mode operation
q Turn OFF the power.
w While holding down [VOL/SQL], turn ON the power to
enter the Set mode.
• “bP” appears.
e Push [VOL/SQL] to select a desired item. Or while holding
down [VOL/SQL], push [Y] or [Z] also selects an item.
r Push [Y] or [Z] to select a desired option of the item.
t To exit the Set mode, push [16].
17
7
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SET MODE ITEMS
(The display shows the current settings, and the selected item is displayed in the dotted circle.)
• Auto Scan*
Starting item
• Beep Tone • Scan resume timer*
• Dual/Tri-watch*
• Automatic
backlighting
• Power Save
• LCD contrast • Monitor key action
• Priority Scan*
: Push +
: Push Push
or
+
*Not available with Holland version.