To Next PageTo Next PageHow to fix Icom Transceiver when no power comes ON?
If your Icom Transceiver is not powering on, it could be due to a couple of reasons. The battery might be exhausted, in which case you should recharge the battery pack. Alternatively, there might be a bad connection to the battery pack, so check the connection to the transceiver.
General| Type | Handheld VHF Marine Transceiver |
|---|---|
| Frequency Range (Rx) | 156.000 - 163.425 MHz |
| Channels | 55 |
| Current Drain (Rx Max. Audio) | 300mA |
| Power Supply | 7.2V DC |
| Waterproof Rating | IPX7 |
| Output Power | 5W / 1W |
| Modulation | FM (16K0G3E) |
Information on RF exposure limits, safe operation, and EMI/compatibility.
Detailed steps for making distress calls using Channel 16.
Recommendation for cleaning the transceiver after salt water exposure.
Emphasizes reading instructions and defines warning, caution, and note symbols.
Highlights product features like waterproofing, dual watch, LCD, and simple operation.
Warnings about power connections, antenna proximity, and safe handling.
Precautions for temperature, children, compass proximity, and FCC compliance.
Rules for distress calls, privacy, and required radio licenses.
Identifies and explains the function of each button and switch.
Instructions for attaching/detaching the battery case, noting waterproofing.
Explains the meaning of all symbols and indicators on the transceiver's screen.
Explains further indicators like dualwatch, battery level, and channel readouts.
Guide to selecting channels 16, 9, and channel groups (USA, INT, CAN).
How to select weather channels and use the weather alert function.
Instructions for using the key lock and adjusting the squelch level.
Step-by-step guide for receiving signals and transmitting messages.
How to program call channels and use the automatic backlighting feature.
Explains and guides the use of dualwatch and tri-watch monitoring functions.
Introduction to priority scan and normal scan functionality.
How to set tag channels and start a scan.
Guide to entering SET mode and configuring beep tones/weather alerts.
Configuration of scan types, timers, auto scan, and monitor actions.
Settings for backlighting, power save, contrast, and self-check.
Settings for battery voltage and S-meter/RF meter indicators.
Instructions for charging Ni-Cd batteries and safety warnings.
How to install alkaline batteries into the battery case.
Information on available optional rapid and multi-chargers.
Lists all accessories supplied with the transceiver.
Instructions for connecting the antenna and attaching the handstrap.
Steps to attach the swivel belt clip to the transceiver and belt.
Steps to safely remove the swivel belt clip from the transceiver.
A table listing common problems, their causes, and solutions with references.
A comprehensive list of VHF marine channels and their frequencies.
Detailed technical specifications for transmitter, receiver, and general features.
List of optional battery cases, chargers, and belt clips.
