t VOLUME/SQUELCH/MONITOR KEY [VOL/SQL MONI]
➥ Push to enter the volume adjustment mode and the
squelch adjustment mode. (pgs. 11, 12)
➥ Push to restore the changed volume level by the noise
detection, volume loud, or volume mute function to the
original. (pgs. 12, 20)
➥ Push and hold for 1 sec. to activate the monitor func-
tion. (p. 13)
➥ While pushing and holding this key, turn power ON to
enter the set mode. (p. 17)
➥ While in the set mode, push to select an item. (p. 17)
y SCAN/DUAL KEY [SCAN DUAL]
➥ Push to start or stop normal or priority scan. (p. 15)
➥
Push and hold for 1 sec. to enter the watch mode. (p. 16)
➥ Push to exit the watch mode. (p. 16)
➥ Push and hold this key and
[Hi/Lo ]
, to activate the
Aq
uaQuake function. (p. 13)
u CHANNEL UP/DOWN KEYS [Y]/[Z]
➥ Selects an operating channel. (pgs. 8, 9)
➥ While in the set mode, selects the setting or value of an
item. (p. 17)
➥ Checks TAG channels or changes scanning direction
during scan. (p. 15)
i FAVOURITE/TAG KEY [FAV TAG]
➥ Push this key to select the favourite (TAG) channels
with ignoring untagged channels in a channel group in
sequence. (p. 8)
➥ Push and hold for 1 sec. to set or clear TAG for the
displayed channel. (p. 15)
➥ While pushing and holding this key, turn power ON to
clear or set all TAG channels in the selected channel
group. (p. 15)
o CHANNEL KEY [CH]
➥
Push and hold for 1 sec. to select the channel group from
U.S.A.*
1
, International, Canadian*
2
and ATIS*
3
. (p. 9)
➥ Push to return to the previous channel before selecting
channel 16 or the call channel.
*
1
U.K. and China versions only.
*
2
China version only.
*
3
German and Holland versions only.
!0 TRANSMIT POWER/LOCK KEY [Hi/Lo ]
➥
Push to
select the output power
from high and low.
(p. 10)
➥ Push and hold for 1 sec. to turn the key lock function
ON or OFF. (p. 13)
!1 POWER KEY [
]
Push and hold to turn power ON or OFF.
!2 LOUD/MUTE KEY [LOUD MUTE]
➥
Push to turn the volume loud function ON or OFF. (p. 12)
➥ Push and hold for 1 sec. to turn the volume mute func-
tion ON, and push to turn the function OFF. (p. 12)
5
3
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Volume adjustment mode
Normal condition
Squelch adjustment mode
PUSH
PUSH
To Next Page
Loading...
Need help?
General
