Icom IC-M35

D U.S.A., International, Canadian and ATIS channels
The transceiver is pre-programmed with U.S.A.*
1
, Inter-
national, Canadian*
2
and ATIS*
3
channels. These channel
groups may be specified for the operating area.
q Push [CH] to select a regular channel.
w Push and hold [CH] for 1 sec. to change the channel
group. Repeat to advance to the next group .
• The usable channel groups are different depending on the ver-
sions.
e Push [Y]/[Z] to select a channel.
• “DUP” appears for duplex channels.
*
1
U.K. and China versions only.
*
2
China version only.
*
3
German and Holland versions only.
For U.K. version
For German and Holland versions
For China version
9
4
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
U.S.A. channelsInternational channels
Push and hold
for 1 sec.
International channels
AT IS channels
Push and hold
for 1 sec.
Push and hold
for 1 sec.
U.S.A. channels
International channels
Canadian channels