Icom IC-M402

40
13
SPECIFICATIONS
■ Specifications
ïï
General
• Frequency coverage :
Transmit 156.025–157.425 MHz
Receive 156.050–163.275 MHz
• Mode : FM (16K0G3E)
DSC(16K0G2B)
• Channel spacing : 25 kHz
• Current drain (at 13.8 V) : Tx 6.0 A (at 25 W output).
Rx 1.2 A (at AF max.)
• Power supply requirement : 13.8 V DC ±15%
• Operating temperature range : –20°C to +60°C; –4°F to +140°F
•Dimensions : 153(W) × 67(H) × 141.6(D) mm
(Projection not included) 6
1
/32
(W) × 2
5
/8
(H)× 5
9
/16
(D) in
• Weight : 900 g ; 2 lb
ïï
Transmitter
• Output power : High 25 W
Low 1 W
• Modulation system : Variable reactance frequency
modulation
• Max. frequency deviation : ±5.0 kHz
• Spurious emissions : Less than –70 dB
ïï
Receiver
• Receive system : Double conversion
superheterodyne
• Sensitivity (12 dB SINAD) : 0.25µV
• Squelch sensitivity : 0.20µV (typical)
•Intermodulation rejection ratio : 70 dB
• Spurious response
rejection ratio : 70 dB
• Adjacent channel selectivity : 70 dB
• Audio output power : 4.5W (typical) at 10% distortion with
a 4 Ω load
•GPS interface : NMEA0183 ver.2.0
All stated specifications are subject to change without notice or
obligation.
00_IC-M402_S.qxd 02.2.21 0:09 PM Page 40 (1,1)