TM 10-7360-226-13&P
CONTAINERIZED KITCHEN (CK) 0006 00
OPERATION UNDER USUAL CONDITIONS
0006 00-22
Ceiling Light Installation
In the event of lamp breakage, be careful in removing glass fragments
and white phosphorous dust that may be dispersed from the fixture.
Handling glass fragments or inhaling phosphorous dust could cause
personal injury.
1. Unpack the removable light fixtures from their storage box and position them as shown in
Figure 14. Install the lights by slipping the hooked brackets at the ends of the fixtures
between the fabric and the arches. Orient each fixture so the end with the power cord is
toward the designated receptacle.
2. Plug the power cords into their marked receptacles in the ceiling raceway.
3. Tuck the excess cable between the fabric and the arches.
4. Place the two arch frame component bags and the moving blanket in the light storage box.
Store the box under the tables in the serving wing or in another convenient location as
desired.
BLACKOUT LIGHTS
REMOVABLE
FIXTURES
REMOVABLE
FIXTURES
Figure 14. Ceiling Light Fixture Layout.
WARNING
To Next Page
Loading...
