4
2
PANEL
DESCRIPTION
0 ALARM INDICATOR (p. ii)
Appears
when
the
alarm function is activated
such for
an
alarm
test
or
distress alarm trans-
mission.
- Not
available
on
General version.
8 RECEIVE INDICATOR (p. 9)
Appears
while receiving
and
when
the
squelch is
open.
@)
TUNE INDICATOR (p. 8)
Blinks while
the
connected antenna tuner, such
as
learn's AT-130/E, is being tuned.
- Tuning starts
when
transmitting
on
a new frequency
or pushing the [TUNE] switch.
0 TRANSMIT INDICATOR
•
Appears
while transmitting. (p. 8)
• Blinks when
the
[TX] key is pushed
for
transmit
frequency
programming. (p. 11)
0 DSC INDICATOR (p. ii)
Appears
when an optional GM-11 ODSC
DSC
TER-
MINAL UNIT controls transceiver functions.
-The
GM-110DSC
can
be
connected
to
GMDSS
versions only.
0
S/RFMETER
•
Shows
the
relative received signal strength
while receiving.
•
Shows
output
power
while transmitting.
•
Shows
antenna
current level when an optional
AT-130E
HF
ANTENNA TUNER is connected
(Europe versions only).
0
CHANNELNAMEREADOUT
•
Shows
the pre-programmed channel name
(alphanumeric) during
channel indication. (p.
5)
- Some versions have
no
channel name function
and
show receive frequency instead.
•
Shows
the
transmit
frequency
during
frequency
indication. (p. 5)
•
Shows
transmit
channel
number
during cross
channel operation (Europe versions only). (p. 1 0)
«3
SQUELCH INDICATOR (p. 9)
Appears when the
squelch is ON.
0 SCAN INDICATOR (p. 6)
Appears when
the
scan
function is in use.
- The
scan
function
is
not available
on
some versions.
-
Pushing [FUNC] then [SOL] starts
and
stops
scan.
~
FUNCTION INDICATOR
Appears when the [FUNC] switch is pushed.
-
Some switches activate secondary functions.
G)
NOISE BLANKER INDICATOR (p. 9)
Appears when the [NB] switch is turned
ON.
~
AGC OFF INDICATOR (p. 9)
Appears when the [AGC] switch is pushed to
indicate
the
AGC
function is deactivated.
Q)
MODE READOUT (p. 8)
Shows
the
selected operating
mode
(type
of
emis-
sion).
(D
SPEAKER OFF INDICATOR
Appears
when
the [SPEAKER] switch is pushed
to
indicate
the
front panel
speaker
is deactivated.
~
CHANNELREADOUT
•
Shows
the selected channel
number
during
channel indication. (p. 5)
•
Shows
the
receive
frequency
during frequency
indication. (p. 5)
~SIMPLEX/DUPLEX
INDICATORS
These
appear
to
show
whether
the selected chan-
nel is simplex
or
duplex.
(fj FREQUENCY INDICATORS (p. 7)
Appear
when the
frequency
entry condition* is
selected
for
frequency
selection.
- The
[CE]
key
toggles
the
indicator
ON
and
OFF.
*Some
versions have
no
frequency
entry condition.
To Next Page
Loading...
