35
13
SPECIFICATIONS AND OPTIONS
•Selectivity :
FM, AM More than 15 kHz/–6 dB
Less than 30 kHz/–60 dB
WFM More than 150 kHz/–6 dB
•Audio output power : 100 mW typ. at 10% distortion
(at 3.0 V DC) with an 8 Ω load
•SP connector : 3-conductor 3.5 (d) mm
(
1
⁄8˝)/8 Ω
D Options
BC-127A/D BATTERY CHARGER
Regularly charges 2 or 4 AA (R6) Ni-Cd batteries. 2 Ni-Cd
batteries are supplied with the BC-127A/D.
LC-146 CARRYING CASE
Helps protect the receiver from scratches, etc.
SP-13 EARPHONE
Provides clear receive audio in noisy environments.
HP-4 HEADPHONE
Provides increased readability of signals in noisy environ-
ments and listening privacy.
AD-92SMA ANTENNA CONNECTOR ADAPTER
Allows you to connect an antenna with a BNC connector.
(SMA to BNC adapter)
CS-R2 CLONING SOFTWARE + OPC-478 CLONING
CABLE
Allows you to transfer data from memories, etc. and quickly
and easily edit and store data via a PC.
OPC-474 CLONING CABLE
Used for handheld-to-handheld cloning.
All stated specifications are subject to change without
notice or obligation.
To Next Page
Loading...
