Need help?Do you have a question about the Icom IC-R9500 and is the answer not in the manual?
Lists key features of the IC-R9500 receiver.
Advises to read the manual carefully and save it for future reference.
Lists critical safety instructions for operating the receiver.
Advises on proper handling, ventilation, and environmental conditions.
Describes the controls and indicators on the front panel.
Details the various input and output connectors on the rear panel.
Explains the information displayed on the LCD screen and menu structure.
Covers unpacking, initial setup, antenna, and ground connections.
Shows essential rear panel connections like antennas and ground.
Explains advanced connections for external equipment like speakers, PC interfaces, and tape recorders.
Covers initial power on, CPU reset, basic settings, and frequency setting methods.
Explains how to select and use VFO and Memory modes.
Details tuning with the main dial and selecting operating modes.
Explains how to adjust audio volume, RF gain, squelch, and tone levels.
Explains how to operate the receiver in FM, WFM, AM, SSB, and CW modes.
Explains how to operate in FSK and P25 modes, including related functions.
Describes how to use the built-in TV tuner and monitor TV programs.
Covers spectrum scope screen functions like Center mode, Fixed mode, Peak marker.
Explains how to use Preamplifier, Attenuator, AGC, and adjust IF filters.
Explains how to use noise reduction, blanker, notch filters, and autotune features.
Provides an overview of voice recorder functions and how to record received audio.
Details how to play back, erase recorded audio, and select storage media.
Describes types of memory channels, selection, programming, and transferring.
Guides on navigating the memory list screen and configuring memory banks.
Lists various scan types and outlines preparation steps.
Explains scan resume conditions, voice squelch, and scan set mode configuration.
Guides on setting up and operating priority, programmed, and ∂F scans.
Explains voice synthesizer usage and dial/panel lock functions.
Details dial click function and antenna selection/switching procedures.
Explains how to set the receiver's date and time.
Describes how to set daily timers and the sleep timer.
Introduces the various set modes and how to operate them.
Covers settings for audio levels, accessory connector, and display/video options.
Includes miscellaneous settings and CF/USB-Memory operations like file saving/loading.
Provides a chart to help diagnose and resolve common operational problems.
Provides instructions for opening the receiver and replacing fuses, batteries, and optional units.
Explains how to reset the CPU and configure the screen saver function.
Information about connecting and controlling the receiver via CI-V interface.
A comprehensive list of CI-V commands for various functions like frequency, mode, scan, and settings.
Lists general specifications like frequency coverage, operating modes, and memory channels.
Details receiver performance specs like sensitivity, selectivity, and spurious response.
Lists optional accessories for the receiver, such as CI-V converter and external speaker.
Crucial warnings and recommendations before updating the firmware, including preparation steps.
Step-by-step guides for updating firmware using USB-Memory or a PC connection.
States Icom Inc.'s responsibility for equipment compliance with directives and standards.
To Next Page
General
