Icom IC-R9500 - D Scanning; D Display; D Voice Recorder; D Format Memory Media

DD
Scanning
DD
Display
DD
Voice recorder
DD
Format memory media
12-3
12
MAINTENANCE
PROBLEM POSSIBLE CAUSE SOLUTION REF.
Programmed scan does
not stop.
Scan does not start.
(Programmed scan)
(Memory scan)
(Select memory scan)
(Mode select memory scan)
(∂F scan)
(Auto memory write scan)
• Squelch is open.
•
The same frequencies have been programmed
in scan edge memory channels PxA and PxB.
•2 or more memory channels have not been
programmed.
•2 or more memory channels have not been
designated as select channels.
•2 or more memory channels with desired
mode have not been programmed.
• The center frequency for ∂F scan does not
programmed.
• Auto write bank is full.
• Readjust the [SQL] threshold.
• Program different frequencies in scan edge
memory channel PxA and PxB.
• Program more than 2 memory channels.
• Designate more than 2 memory channels as
select channels for the scan.
• Program more than 2 memory channels with
desired operating mode.
• Program the center frequency for ∂F scan.
• Clear the memory channels of auto write bank.
pgs. 3-8,
8-3
p. 8-6
pgs. 7-4,
8-11
p. 8-12
pgs. 7-4,
8-14
p. 8-8
pgs. 7-7,
8-4
PROBLEM POSSIBLE CAUSE SOLUTION REF.
The displayed frequency
does not change properly.
The key operation on the
front panel does not func-
tion.
• The dial lock function is activated.
• The panel lock function is activated.
•
Push [LOCK] to turn the function OFF.
• Push [PANEL LOCK] to turn the function OFF.
p. 9-2
p. 9-2
PROBLEM POSSIBLE CAUSE SOLUTION REF.
The voice recorder cannot
record.
The voice recorder stops
recording.
• The selected memory media is full.
• The recording memory media is full.
• The recording file size is at maximum (2 GB).
•
Select a different memory media or clear the
unnecessary files.
• Select a different memory media or clear the
unnecessary files.
• Select a lower sound quality for long duration
recording.
p. 6-4
p. 6-4
p. 6-6
PROBLEM POSSIBLE CAUSE SOLUTION REF.
Format error appears
when formatting in FAT32
Format error appears
when formatting in FAT
• The inserted memory media capacity is small-
er than 64 MB.
• The inserted memory media capacity is larger
than 2 GB.
• Insert a memory media larger than 64 MB or
select the FAT format.
• Insert a memory media smaller than 2 GB or
select the FAT32 format.
p. 11-23
p. 11-23