Icom IC-V200 - AF, Squelch, and CTCSS Circuitry; Transmitter, PLL, and Logic Circuitry

|
TRANSMITTING
The
following
transmitting
procedures
should
be
started
after
finish-
|
7
ing
the
steps
described
in
RECEIVING
on
p.
5.
@ Push the PTT (Push-To-Talk) SWITCH on the microphone to
begin transmitting.
e The [TX] INDICATOR lights up during transmission.
2) Speak into the microphone using your normal voice level.
(3) Release the PTT SWITCH to return to receiving.