Icom ID-52A

PANEL DESCRIPTION
1
4
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
EMR/BK/PACKET LOSS/AUTO REPLAY ICONS
• EMR:
Displayed when the Enhanced Monitor Request (EMR) function is ON.
• BK: Displayed when the Break-in (BK) function is ON.
• L: Displayed when packet loss has occurred.
•
: Displayed when the Auto Reply function is ON.
AUTO POWER OFF ICON
Displayed when the Auto Power OFF function is ON.
ATTENUATOR ICON
Displayed when the attenuator is ON. (p. 16)
CLOCK DISPLAY
RECORD ICONS (p. 27)
•
: Displayed while the transceiver is recording.
•
: Displayed while the recording is paused.
WEATHER ALERT ICON
Displayed when the Weather Alert function is ON. (Only the ID-52A)
SKIP ICONS
• SKIP: Displayed when Memory Skip is selected.
• PSKIP: Displayed when Program Skip is selected.
MEMORY CHANNEL NUMBER
• In the Memory mode, displays the selected Memory group and Memory channel
number.
• In the Call Channel mode, displays “144” or “433” and “C0” or “C1.”
FREQUENCY SELECTING MODE ICONS
•
: Displayed while in the VFO mode.
•
: Displayed while in the Memory mode.
•
: Displayed while in the Call Channel mode.
•
: Displayed while in the Weather Channel mode.
•
: Displayed while the DR function is ON.
S/RF METER
• Displays the relative signal strength of the received signal.
• Displays the output power level of the transmit signal.
POWER ICONS
Displays the output power level of the transmit signal in 5 levels
(SLO/LO1/LO2/MID/no icon).
L When you select HIGH power, the power icon disappears.
MEMORY NAME DISPLAY
L You can change the display type in the Quick Menu window.
FREQUENCY READOUT
Displays an operating frequency.
MAIN BAND ICON
• When the Dualwatch function is ON, indicates that the selected band (A or B) is the
MAIN band.
• When the Dualwatch function is OFF, indicates the selected band (A or B).
• TM: Displayed while in the Terminal mode.
• AP: Displayed while in the Access Point mode.
TIP: See “About the DV Gateway function” that can be downloaded from the Icom
website about the Terminal mode and the Access Point mode.