Icom ID-52A

SPECIFICATIONS
9
36
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
L All stated specications are typical and subject to change without notice or obligation.
D Bluetooth
• Version: Bluetooth Version 4.2
• Transmission Output: Class 2
• Prole: HFP, HSP, SPP, GATT (Serial) over LE
• The maximum number of paired Bluetooth devices:
7 devices
L Maximum headsets or data devices are 4 devices each, and the maximum combination is
5 devices in total. Maximum Bluetooth Low Energy devices are 2 devices.
• Device Name: ICOM BT(ID-52) (at default)
• Passkey: 0000 (four zeros)
D Receiver
• Spurious and image rejection ratio:
More than 60 dB
• Squelch Sensitivity:
Ham band Less than 0.18 μV (threshold)
Outside Ham band
D Transmitter
• Modulation system:
FM/FM-N Variable reactance frequency modulation
DV GMSK reactance frequency modulation
• Output power (at 7.4 V DC): High: 5.0 W, Mid: 2.5 W, Low2: 1.0 W, Low1: 0.5 W, S-Low: 0.1 W
• SAR 10g: XX W/kg
• Maximum frequency deviation:
FM ±5.0 kHz
FM-N ±2.5 kHz
• Spurious emissions: Less than –60 dBc at High/Mid
Less than –13 dBm at Low2/Low1/S-Low
• Microphone impedance: 2.2 kΩ
Band Frequency range (MHz) FM/FM-N/WFM*
1
AM/AM-N*
2
BC band 76.000 ~ 108.000 Less than 1.8 μV –
A band
108.000 ~ 136.991 – Less than 1 μV
137.000 ~ 142.000 Less than 0.32 μV Less than 1 μV
142.005 ~ 148.000 Less than 0.32 μV –
148.005 ~ 174.000 Less than 0.32 μV –
225.000 ~ 259.995 Less than 0.56 μV Less than 1.8 μV
260.000 ~ 374.995 Less than 0.32 μV Less than 1 μV
375.000 ~ 399.995 Less than 0.32 μV –
400.000 ~ 479.000 Less than 0.32 μV –
B band
137.000 ~ 148.000 Less than 0.32 μV –
148.005 ~ 174.000 Less than 0.32 μV –
375.000 ~ 399.995 Less than 0.32 μV –
400.000 ~ 479.000 Less than 0.32 μV –
*
1
“WFM” is for only BC band. “FM” and “FM-N” is for only A/B band.
*
2
“AM-N” is for only 108.000 MHz ~ 143.995 MHz.