Icom ID-52A

MEMORY OPERATION
5
24
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
■ Selecting a Memory channel
In the Memory mode, you can select the Memory channels by rotating [DIAL].
1. Push [MR] to enter the Memory mode.
L For only the ID-52A, pushing [MR] each time selects the Memory and Weather
Channel modes.
2. Rotate [DIAL].
• Selects a Memory channel.
L To select the Memory group, push [QUICK], and then select “Group Select.”
L Blank channels are not selected.
TIP: To sequentially select a channel
in a di󰀨erent group
Set “Channel Select Group Range” to
“All Groups” in the Quick Menu window.
■ Viewing the Memory channel contents
You can view the Memory channel contents on the MEMORY screen.
Example: Viewing the contents of Channel 01 in Group 00.
[MENU] > MEMORY > Memory CH
1. Push [MENU].
2. Select “Memory CH” in the “MEMORY” menu.
3. Select Group “00.”
4. Select Channel “01.”
• Channel contents are displayed.
L Rotate [DIAL] to scroll the screen.
L To exit the MENU screen, push [MENU].
Memory group number
and channel number