Icom ID-52A

Bluetooth
®
OPERATION
8
32
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
TIP:
Auto Connect function
The receiver automatically connects to a paired Bluetooth device.
([MENU] > SET > Bluetooth Set > Auto Connect)
Re-searching Bluetooth device
“No Device Found” is displayed if the receiver could not
nd a Bluetooth device.
1. Push [QUICK].
2. Select “Re-search.”
■ Connecting to a Bluetooth
®
headset
You can connect an optional Bluetooth headset to the transceiver.
Step 1. Selecting the pairing mode of the headset.
See the instruction manual of the headset to select the pairing mode.
Step 2. Searching for the headset (Transceiver)
[MENU] > SET > Bluetooth Set > Pairing/Connect
1. Push [MENU].
2. Select “Bluetooth Set” in the “SET” menu.
3. Select “Pairing/Connect.”
4. Select “Device Search.”
5. Select “Search Headset.”
• Displays the usable headsets in the pairing list.
6. Select a headset to pair.
• The conrmation dialog is displayed.
7. Select “YES.”
• After connecting to the headset, is displayed in the pairing list.
is displayed
while connected.
Headset icon
(“ICOM” indicates the Icom headset.)
Device name
8. To exit the MENU screen, push [MENU].
L While connected to a Bluetooth device, the Bluetooth
icon is displayed on the Standby screen.
is displayed while
connected.