ICON PLATFORM NANO - Page 63

63
Rec (transport) = Begin recording Audio and MIDI input
FastForward= Shuttle forward. Press again to increase forward speed
Rewind =Shuttle reverse. Press again to increase backward speed
Stop - Stop = Playhead jumps to beat 1 bar 1 or active cycle position
Play - Play = Playhead jumps back to the nearest bar or active cycle position
Shift +Play = Pause playback
Channel Strip Buttons:
Rec(channel) = Arms the channel strip for recording
Solo = Engage Solofor one or multiple tracks
Mute = Engage Mute for one or multiple tracks
Select = Focuses and selects the track, displays the full track name on the LCD display
Shift + Select = Set the channel volume fader to 0 dB
Option + Select =Add Slave Track: Extra track with shared channel strip – for tracking/editing
Shift + Option + Select = Createnew track (Uses track type of selected track)
Option + Rec (channel strip) = Arm/disarm all channel strips
Option + Solo (channel strip) =Toggle Solo Scenefor all channel strips:
(Press once to disable Solo, press again to restore all previously soloed tracks)
Option + Mute = DisableMute for all channel strips
Cycle:
The Cyclebuttontoggles the playback loop cycle on/off. Hold Cycleand turn the Jog Wheel to
quickly dene the cycle area. Hold Cycle and turn the Jog Wheel backwards to dene a skip
area.0
Cycle+ Rewind = Set cycle start to the playhead position
Cycle+ FastForward= Set cycle end to the playhead position
PressShift+Cycleto display the cycle edit menu. The Encoder Knobs adjust the cycle area:
Press Encoder Knob 2 = Set cycle area to selected regions in Arrange Window
Turn Encoder Knob 3 = Move the cycle area by bar
Press Encoder Knob 5 = Set cycle start to the playhead position
Turn Encoder Knob 5 = Move cycle start in bars
Turn Encoder Knob 6 = Move cycle start in beats
Press Encoder Knob 7 = Set cycle end to the playhead position
Turn Encoder Knob 7 = Move cycle end in bars
Turn Encoder Knob 8 = Move cycle end in beats
Fader Lock:
Press Lock Mix to disable touch sensitive changes to fader position. Automation remains active.
This is useful to secure a nished mix.
Press Control + Flip to set all faders to zero and disable all motor fader movement. This is useful
to silence the control surface. (Platform B+ only)