ICS 695XL Service Manual

©2017 ICS - Blount Inc, Specications subject to change without notice. REV19JUNE2017 P/N 598901
75
695XL SERVICE MANUAL
20.37
Tighten the screws to 106 - 124 in-lbs./
12 - 14 Nm using an “x” pattern.
20.39
Install shaft seals (refer to section 20.7).
20.38
Cut the excess gasket over the cylinder
port and carburetor area. Tap both sides
of the shaft with a soft mallet and ensure
free movement of shaft and connecting
rod.
20. CRANKCASE

ICS 695XL Specifications

General

Brand	ICS
Model	695XL
Category	Chainsaw
Language	English