To Next Page

To Previous Page

#1 Coil Error

Code: E14

LED Light Display: 3 red+ 1 red

LCM Display: As shown in figure below

Cause: Coil 1 is damaged.

Corrective Measure: Notify the ICT personnel

#2 Coil Error

Code: E15

LED Light Display: 3 red + 2 red

LCM Display: As shown in figure below

Cause: Coil 2 is damaged.

Corrective Measure: Notify the ICT personnel

#3 Coil ERR

Code: E16

LED Light Display: 3 red +3 red

LCM Display: As shown in figure below

Cause: Coil 3 is damaged.

Corrective Measure: Notify the ICT personnel

Low Level LED Error

Code: E17

LED Light Display: 3 red+ 5 red

LCM Display: As shown in figure below

Cause: Low level LED is damaged. Otherwise, optical lens may be covered by dirt or

dust.

Corrective Measure: When error is detected, changer retries once a minute for 10 times. It

will stop if the problem is not resolved after 10 times retry. Clean

the optical lens with soft fabric. If the problem cannot be solved,

notify ICT personnel for support.

Coil Error #1

E14

Coil Error #2

E15

Coil Error #3

E16

Tube Detection

Sensor Error E17

ICT cc6100 User Manual

Questions and Answers: