MACH+ heat recovery units— User and installer manual
© Ideal Clima-Page 4 / 20
Carefully read and scrupulously adhere to the following tips:
- the first start-up must be carried out exclusively by qualified personnel authorised by the manufacturer;
- at the time of installation or when action is required on the unit, it is necessary to adhere strictly to the
rules contained in this manual, observe the indications on board the unit and in any case apply all
appropriate precautions;
- possible accidents to persons and things can be avoided by following these technical instructions
compiled with reference to the Machinery Directive 2006/42 / EC and subsequent additions. In any
case always comply with national safety standards;
- do not remove or deteriorate protections, labels and writings, especially those required by law and, if
no longer legible, replace them.
The Machinery Directive 2006/42 / EC gives the following definitions:
HAZARDOUS AREA: any area within and / or in the vicinity of a machine where the presence of an exposed
person constitutes a risk to the safety and health of the machine.
EXPOSED PERSON: any person who is wholly or partly in a hazardous area.
OPERATOR: the person (s) responsible for installing, operating, adjusting, servicing, cleaning,
repairing and transporting the machine.
All operators must comply with international and country of destination accident regulations in
order to avoid possible accidents.
The European community has adopted directives on the safety and health of workers, including directives
89/391/EEC, 89/686/EEC, 89/654/EEC, 89/655/EEC, 89/656/EEC, 86/188/EEC, 92/58/EEC and 92/57/EEC which
each employer is obliged to comply with and to enforce.
The units have been designed and built according to the current state of the art and the current rules of the
technique. The laws, provisions, prescriptions, ordinances, directives in force for such machines have been
observed.
The materials used and the equipment parts, as well as the production processes, quality assurance and
Control meet the highest demands of safety and reliability.
By using them for the purposes specified in this user manual, by handling them with due diligence and by
performing accurate maintenance and revisions to the art, continuous performance and functionality and
durability of the units can be maintained.
1.3 OPERATIONS AND MAINTENANCE
The user manual can never replace an adequate technical expertise. For some particularly demanding
maintenance operations, this manual is a reminder of the main activities to be performed by operators with
specific training acquired.
Read the following tips carefully:
- Constant and accurate preventive maintenance always guarantees the high operating safety of the
unit. Never postpone necessary repairs and have them carried out only and exclusively by specialized
personnel, using only original spare parts;
- Operators ' workplaces must be kept clean, tidy and free of objects that may restrict free movement.
- Operators must avoid clumsy operations, in uncomfortable positions that can compromise their
balance.
- The workplace must be adequately illuminated for the intended operations. Insufficient or excessive
lighting may involve risks.
- Any intervention on the unit must be carried out by qualified personnel;
- before carrying out any operation or maintenance on the unit, make sure that you have removed the
power supply;
- Make sure that the safety devices are working properly and there is no doubt about their operation;
otherwise do not start the unit under any circumstances;
- Use only tools prescribed by the manufacturer of the unit. In order to avoid personal injury, do not use
worn or damaged, low-quality or improvised tools;
- after cleaning the unit, the operator must check that there are no worn or damaged parts or not
securely fixed, otherwise ask the maintenance technician for help;
To Next Page
Loading...
