MACH+ heat recovery units— User and installer manual
© Ideal Clima-page 5 of 20
- the use of flammable fluids in cleaning operations is prohibited.
For cleaning the unit do not use diesel, petroleum or solvents as the former leave an oily patina that promotes
the adhesion of dust, while the solvents (even if weak) damage the paint and thus promote the formation of
rust. Do not use water or steam jets on sensors, connectors or any electrical part.
1.4 INTENDED USE
MACH+ recovery units, with high efficiency, are designed to ventilate small residential or commercial
environments, as well as to save energy by recovering low heat in the exhausted air.
Machines are a component of the system and are not able to operate autonomously: they need channels for
air intake and distribution.
MACH+ heat recovery units are built in different models, both for false ceiling, ceiling or wall installation.
Their use is recommended within the operating limits specified in this manual.
Place the unit in environments where there is no danger of explosion, corrosion, fire and where there
are no vibrations and electromagnetic fields. Do not operate differently than indicated and do not
neglect operations necessary for safety.
1.5 GENERAL SAFETY RULES
1.5.1 WEAR PROTECTIVE CLOTHING
Each operator must use personal protective equipment such as gloves, head protection helmet, safety glasses,
safety shoes, noise protection headphones.
1.5.2 FIRE EXTINGUISHER AND FIRST AID
Place a first aid box and a fire extinguisher near the unit.
1.5.3 WARNINGS FOR CHECKS AND MAINTENANCE
Apply a sign with the words: "under maintenance" on all sides of the unit.
Carefully check the unit according to the list of operations in this manual.
1.5.4 SAFETY PLATES
General alarm electrical voltage moving organs burns cutting wounds
2 PRODUCT DESCRIPTION
2.1 DESCRIPTION
The very high efficiency heat recovery units of the MACH + series have been designed for use in residential and
small commercial areas, where you want to expel spoiled air, without waste the heat contained in it.
The installation of IDEAL CLIMA heat recovery units with very high efficiency, allows to easily achieve energy
consumption appropriate to Class A, with proportional increase in the value of the property.
Mach+ series' units use Brushless electronic commutation motors with permanent magnets, and with built-in
inverter, which guarantee high performance with extremely low fuel consumption and noise.
To Next Page
Loading...