IDEAL Logic+ SYSTEM 15 - Fault Codes

6
Ideal Logic + System - User’s
8. FAULT CODES
DISPLAY CODE ON BOILER
DESCRIPTION ACTION
Outside Sensor Failure
Restart the appliance - if the boiler fails to operate then please contact
Ideal (if under warranty) or alternatively a Gas Safe Registered
Engineer if outside of the warranty period. In IE contact a Registered
Gas Installer (RGII).
Low Mains Voltage
Contact a qualied electrician or your electricity provider.
Uncongured PCB
Please contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE contact a
Registered Gas Installer (RGII).
Uncongured PCB
Restart the appliance - if the boiler fails to operate then please contact
Ideal (if under warranty) or alternatively a Gas Safe Registered
Engineer if outside of the warranty period. In IE contact a Registered
Gas Installer (RGII).
5 Boiler Restarts in 15 minutes
1. Turn power off and on at the fused spur.
2.
If the boiler fails to operate please contact Ideal (if under warranty)
or alternatively a Gas Safe Registered Engineer if outside of the
warranty period. In IE contact a Registered Gas Installer (RGII).
False Flame Lockout
Restart the appliance - if the boiler fails to operate then please contact
Ideal (if under warranty) or alternatively a Gas Safe Registered
Engineer if outside of the warranty period. In IE contact a Registered
Gas Installer (RGII).
BCC Activation Fault
Restart the appliance - if the boiler fails to operate then please contact
Ideal (if under warranty) or alternatively a Gas Safe Registered
Engineer if outside of the warranty period. In IE contact a Registered
Gas Installer (RGII).
Check system pressure is between 1 & 1.5bar on the pressure gauge (if tted
to a sealed system). If the boiler fails to operate then please contact Ideal (if
under warranty) or alternatively a Gas Safe Registered Engineer if outside of
the warranty period. In IE contact a Registered Gas Installer (RGII).
Flame Loss
See Action - Fault Code L 2
Fan Fault
Restart the appliance - if the boiler fails to operate then please contact
Ideal (if under warranty) or alternatively a Gas Safe Registered
Engineer if outside of the warranty period. In IE contact a Registered
Gas Installer (RGII).
Flow Thermistor
Restart the appliance - if the boiler fails to operate then please contact
Ideal (if under warranty) or alternatively a Gas Safe Registered
Engineer if outside of the warranty period. In IE contact a Registered
Gas Installer (RGII).
Return Thermistor
Restart the appliance - if the boiler fails to operate then please contact
Ideal (if under warranty) or alternatively a Gas Safe Registered
Engineer if outside of the warranty period. In IE contact a Registered
Gas Installer (RGII).
Flow Temperature Overheat
or
Uncongured PCB
BCC Fault
Flow/Return Reversed
Please contact a Gas Safe Registered Engineer. In IE contact a
Registered Gas Installer (RGII).
1. Check other gas appliances in the house are working to conrm a
supply is present in the property.
2. If other appliances do not work or there are no other appliances,
check the gas supply is on at the meter and/or pre payment meter
has credit. If the boiler fails to operate then please contact Ideal
(if under warranty) or alternatively a Gas Safe Registered engineer
if outside of the warranty period. In IE contact a Registered Gas
Installer (RGII).
Flame Loss
Low Water Pressure
Check system pressure is between 1 & 1.5bar on the pressure
gauge. If the boiler fails to operate then please contact Ideal (if under
warranty) or alternatively a Gas Safe Registered Engineer if outside of
the warranty period. In IE contact a Registered Gas Installer (RGII).