iDevices Kitchen thermometer - Probe Toggle Buttons; Proximity Sensor; Custom & Preset Alarms

10
• Left side LED illuminates to indicate Probe 1 temperature being
displayed.
• Right side LED illuminates to indicate Probe 2 temperature being
displayed.
Probe Toggle Buttons
The Kitchen Thermometer has two buttons adjacent to the power button
to toggle between the probes when there is more than one probe
connected.
• Pressing the < or > button will switch from the currently displayed
probe temperature (as indicated by the illuminated probe indicator
LED) to the next probe.
• Holding either the < or > button down for one second will activate
a cycle that will continuously cycle through displaying each probe’s
temperature.
• Pressing the <, >, or power button while the alternating display
cycle is activated will disable the display cycle.
Proximity Sensor
The use of Bluetooth
®
Smart allows the Kitchen Thermometer to sense
when a paired smart device moves in or out of range. The Kitchen
Thermometer will automatically wake and sleep at the below distances to
conserve power:
• Sleep ~ 30 feet away
• Wake ~ 5 feet away
Custom & Preset Alarms
Manage iPhone, iPad or iPod touch alarms:
If you are having issues hearing the alarms from the iDevices Connected
app, try these steps:
• Open Settings on your smart device
• Tap “Notication Center”