iDevices Kitchen thermometer - Battery Replacement; Powering On & Off

5
for instructional videos, step-by-step instructions and FAQ’s for
troubleshooting.
Battery Replacement
To replace your Kitchen Thermometer batteries, follow these steps:
• Separate the Kitchen Thermometer from its base by rmly holding
the base with one hand and gently pull the Kitchen Thermometer
top upwards with the other hand.
• On the underside of the Kitchen Thermometer, depress and remove
the battery door.
• Replace the two AA batteries with their negative terminals
compressing the springs and replace the battery door.
Powering On & Off
To turn on the Kitchen Thermometer, follow these steps:
• Press the power button located at the bottom of the faceplate
between the < and > buttons.
• The display will animate, and a single beep will be heard, indicating
it has powered on.
To turn off the Kitchen Thermometer, follow these steps:
• Press and hold down the power button located at the bottom of
the faceplate between the < and > buttons for three seconds. The
display will show “OFF”.
• Upon releasing the power button, the Kitchen Thermometer will
turn off.
Auto Shut-Off:
• The Kitchen Thermometer will stay powered on for ve minutes
before automatically turning off if there are no probes installed and
it is not paired to a smart device.
• The Kitchen Thermometer will stay powered on for eight hours