iDevices Kitchen thermometer - Connecting

6
before automatically turning off if not paired to a smart device and
probes are installed.
• The Kitchen Thermometer will stay powered on indenitely if at
least one probe is installed and it is paired with a smart device.
Connecting
To connect your Kitchen Thermometer to your iPhone, iPad, iPod touch or
Android device follow these steps:
• Open Settings
• Tap Bluetooth
• Set Bluetooth to On
• While turned on, place your Kitchen Thermometer next to your
smart device and open the iDevices Connected app. Your smart
device will automatically recognize any available iDevices products
and display them in the device manager. You can view your device
manager by tapping the iDevices logo at the top of the app.
• Select your Kitchen Thermometer from the device manager. You
will then be sent a pairing request. Once you accept, your smart
device will pair with the Kitchen Thermometer and you are ready to
congure your settings and start cooking!
To connect an additional Kitchen Thermometer (or other iDevices product)
to your iPhone, iPad, iPod touch or Android device follow these steps:
• While turned on, place your Kitchen Thermometer (or other
iDevices product) next to your smart device and open the iDevices
Connected app.
• Tap on the gray bar located at the top of the screen to expose the
device manager. Select the product you would like to pair with
from the device manager. Your smart device will display a pairing
request. Once accepted, your smart device will pair with the
additional product and you are ready to congure your settings and
start cooking!