iDevices Kitchen thermometer - Renaming Probes

12
Creating a custom preset alarm:
• Tap “Set Preset”
• Tap “Create New”
• Name your preset
• Set temperature(s)
• Tap “Save”
Your custom preset will be saved in the “My Peak Presets”
and “My Range Presets” sections of the alarm screen.
The iDevices Connected app will not display temperatures
below -22°F (-30ºC) or above 572°F (300ºC).
When your target temperature has been reached, the
Kitchen Thermometer will produce an audible tone and
the iDevices Connected app alarm will alert you with a
notication.
When a temperature reading goes outside your target
range, the Kitchen Thermometer will produce an audible
tone and it’s display will blink the current temperature as the
iDevices Connected app alarm alerts you.
Renaming Probes
A probe can be renamed by tapping on the “Probe #” to the left of the
running temperature, then:
• Naming your probe under “Probe Name”
• Choose a probe color from the “Probe Color Indicator” if needed
• Tap “Save” when done