IDS 1632 - 15 Keypad Options

IDS 1632 Installer Manual 700-256-02K Issued September 2009
58
15. Keypad Options
LOCATIONS 400 – 415 Individual Keypad Setup
These locations allow the installer to setup the individual keypad properties.
Location
Keypad ID
Location
Keypad ID
400 Keypad 1 408 Keypad 9
401
Keypad 2
409
Keypad 10
402
Keypad 3
410
Keypad 11
403
Keypad 4
411
Keypad 12
404 Keypad 5 412 Keypad 13
405 Keypad 6 413 Keypad 14
406 Keypad 7 414 Keypad 15
407 Keypad 8 415 Keypad 16
Sub-location 1 Keypad Partition (Default = Partition 1)
Sub-location 2 Keypad Options
(Change partitions by entering [MODE] [*] [Partition Number] [*], in USER MODE)
LED
ON / OFF
Action
1
ON
The Keypad will timeout back to its default partition after it has
been used to view another partition
OFF
The keypad will not timeout and will continue to show current
partition information
2
ON
Keypad sleep mode enabled
OFF
Keypad sleep mode disabled
3
ON Enable Keypad Zone
OFF Disable Keypad Zone
4
ON RESERVED
OFF RESERVED
5
ON Keypad is an ARMING Keypad
OFF RESERVED
6
ON RESERVED
OFF RESERVED
7
ON Page two Zones Status (Zones 17 to 32 displayed)
OFF
Page one Zones Status (Zones 1 to 16 displayed)