IDS 1632 - 14 Programmable Output Options

IDS 1632 Installer Manual 700-256-02K Issued September 2009
56
Sub-location 4 Stay Close Reporting Code
This code is reported when the panel is STAY ARMED.
Sub-location 5 Open Reporting Code
This code is reported when the panel is disarmed.
Sub-location 6 Siren Cancel Reporting Code
If the siren is sounding and the siren is cancelled using a valid user code, a cancel code will be reported.
Cancelling a silent alarm or silent panic will not cause the cancel siren code to be reported.
14. Programmable Output Options
LOCATIONS 388 – 399
Programmable Output Timing Setup
Locations 388 to 399 allow the installer to setup the timing characteristics of each programmable output
individually.
Location
Output No.
Output Type
388 1 Panel Prog. Output 1
389 2 Panel Prog. Output 2
390 3 Panel Prog. Output 3
391 4 Panel Prog. Output 4
392 5 Panel Prog. Output 5
393 6 Panel Prog. Output 6
394 7 Panel Prog. Output 7
395 8 Panel Prog. Output 8
396
9
Zone Expander 2, Prog Output 2
397
10
Zone Expander 2, Prog Output 1
398 11 Zone Expander 1, Prog Output 2
399 12 Zone Expander 1, Prog Output 1
Sub-location 1
Output Pulse Time
This sub-location determines the length of time for which an output will pulse.
Value
Delay
Value
Delay
0 (Default) 3 seconds 8 2 minutes
1 10 seconds 9 3 minutes
2 15 seconds 10 4 minutes
3 20 seconds 11 5 minutes
4 25 seconds 12 10 minutes
5
30 seconds
13
15 minutes
6
45 seconds
14
18 minutes
7
1 minute
15
21 minutes