IDS 1632 - 13 User Options; Table 12: User Codes

IDS 1632 Installer Manual 700-256-02K Issued September 2009
52
Sub-location 45 Clear Programmable Outputs On Disarming
This bitmapped sub-location allows any programmable output to be cleared (set low) on disarming.
The output/s to be cleared will be displayed by lit zone LED’s representing the output i.e. zone
1 = output 1 etc. To toggle the status of the output, press the [NUMBER OF OUTPUT] [*] if the LED
was off it will now come on and visa versa.
(To exit this mode press [#])
LED
Output
1 Panel - Programmable Output 1
2 Panel - Programmable Output 2
3 Panel - Programmable Output 3
4 Panel - Programmable Output 4
5 Panel - Programmable Output 5
6 Panel - Programmable Output 6
7 Panel - Programmable Output 7
8 Panel - Programmable Output 8
9 Wired Zone Expander 2 - Programmable Output 2
10 Wired Zone Expander 2 - Programmable Output 1
11
Wired Zone Expander 1 - Programmable Output 2
12 Wired Zone Expander 1 - Programmable Output 1
13. User Options
LOCATIONS 136 – 385 Individual User Code Setup
The IDS 1632 panels provide for 250 user codes. These locations allow the installer to configure the user
code properties.
Table 12 : User Codes
Loc Number
User Number
Loc Number
User Number
136 User 1 261 User 126
137 User 2 262 User 127
138 User 3 263 User 128
139 User 4 264 User 129
140 User 5 265 User 130
141 User 6 266 User 131
142
User 7
267
User 132
143 User 8 268 User 133
144 User 9 269 User 134
145 User 10 270 User 135
146 User 11 271 User 136
147 User 12 272 User 137
148 User 13 273 User 138
149 User 14 274 User 139
150 User 15 275 User 140
151 User 16 276 User 141
152
User 17
277
User 142