IDS X16 User Manual

56
Appendix | IDS X Series Training V2.3
The table below shows which locations belong to which partitions.
Location
Partitions
User Slot
Location
Partitions
User Slot
600
All
609 & 610
5
50 to 59
601 & 602
1
10 to 19
611 & 612
6
60 to 69
603 & 604
2
20 to 29
613 & 614
7
70 to 79
605 & 606
3
30 to 39
615 & 616
8
80 to 89
607 & 608
4
40 to 49
Note: The user code must also be a code that belongs to the partition and entered into the correct user slot
numbers for the partition that the person needs to interact with.
Location 617: User Reporting Codes
Location Type: Bitmap
If open and close reporting is required by default all user options are enable therefore to enable reporting
the global option under partition options, Locations 211 to 218 must be enabled. In this location you can
enable or disable per user.
Option
Default
Action
Description
1
ON
Close reporting
Enable if a close signal is to me sent to the security company
2
ON
Stay Close Reporting
Enable if a stay close signal is to me sent
3
ON
Open Reporting
Enable if a open signal is to me sent
4
OFF
Siren Cancel Reporting
Enable if the siren is active and a user cancels the siren
5
Reserved
6
OFF
AC Fail Reporting
Enable if aA signal is to me sent when the electricity goes off
7
OFF
AC Restore Reporting
Enable ifA signal is to me sent when the electricity is stored
8
OFF
Low Battery Reporting
Enable if aA signal is to me sent when the battery reaches 10.5V
9
On
Auto Test Reporting
This is a signal reporting that the alarm is communicating
10
OFF
Zone Bypassing Reporting
Enable if aA signal is to me sent when zones are bypassed
Location 618: User Split Reporting
Location Type: Bitmap
Select which group of phone numbers to report the user reporting codes per code.
Option
Default
Action
Option
Default
Action
Close
OFF
Telephone Module 1
Open
OFF
Telephone Module 2
Stay Close
OFF
Telephone Module 1
Siren Cancel
OFF
Telephone Module 2
Appendix
1. Extra Contact ID Zone Reporting……………………………………………………………………..57
2. Communication Default Settings.…………………………………………………………………….59
3. Features Grouped by Location……………………………………………………………………….67

IDS X16 Specifications

General

Brand	IDS
Model	X16
Category	Security System
Language	English