Need help?Do you have a question about the IDS X64 and is the answer not in the manual?
General| Keypads | 8 |
|---|---|
| Stay/Away Arming | Yes |
| Tamper Protection | Yes |
| Operating System | Proprietary |
| Supported Protocols | Contact ID, SIA |
| Power Supply | 16.5VAC |
| Backup Battery | 12VDC 7Ah |
| Alerts | SMS |
| RAM | Unknown |
Guidance on initial setup and safe operation of the alarm system.
Overview of how to view information on the LED keypad.
Lists keys and their functions for data entry on an LED keypad.
Details the procedure for arming the system in Away mode.
Explains how to arm the system quickly in Away mode.
Describes Stay arming, allowing users to remain on premises.
Details how to arm the system quickly in Stay mode without an exit delay.
Describes arming the system using external devices like key-switches or remotes.
Explains automatic arming at a pre-programmed time.
Step-by-step guide to disarm the system using a user code.
Explains how to disarm the system using external devices.
Details the process for bypassing and un-bypassing individual zones.
Explains how to activate and manage a fire alarm condition.
Details how to activate a panic alarm for emergency response.
Explains how to activate a medical alarm for emergency personnel.
Describes the duress code for discreetly signaling an emergency.
Details how to view the system's event log, primarily on LCD keypads.
Provides instructions for managing user codes, including adding, deleting, and editing.
Lists advanced programmable options for system configuration.
Explains how to set and adjust the system's time and date.
Step-by-step guide to add a new user code using Option 0.
Instructions for editing an existing user code using Option 1.
Guide to delete a user code when the code itself is known, using Option 2.
Details on adding or editing user code slots using Option 3.
Instructions for deleting a user code by its slot number using Option 4.
Explains how to view the slot number associated with a user code via Option 5.
Details how to assign properties to user codes using Option 10.
Explains how to assign user codes to specific partitions using Option 11.
Details how to configure user outputs for automation or signaling using Option 13.
Explains how to enable user reporting codes using Option 14.
Details how to specify telephone modules for reporting codes using Option 15.
Provides instructions for editing the system time using Option 40.
Explains how to edit the system date using Option 41.
Details the quick select method for choosing a Stay Profile.
Guides on programming zones to act as Stay zones.
Step-by-step instructions for programming a zone as a Buzz zone.
Details how to program zones to function as Chime zones.
Provides explanations for various trouble conditions indicated by the system.
Explains how to change the partition currently being viewed on the keypad.
Details how to control system outputs (like lights) via the keypad.
Introduces the maintenance code for accessing limited installer locations.
To Next Page
