Section: 1
IDS X64 User Manual 700-398-01D Issued August 2010
Violate
A zone is “violated” when a sensor connected to a zone input registers a door opening, a window
opening, somebody moving in the room, or glass breaking – depending on the sensor for that zone.
Zone
A zone is a specific area of your premises monitored by a sensor that detect violations (doors/windows
opening or people moving) in that area.
Introduction to the IDS X64
Congratulations on your purchase of an IDS Alarm Panel to protect your most valued possessions.
The IDS X64 is a versatile 8-zone alarm panel with 8 partitions and can be expanded to monitor 64 zones.
Most features are optional and may be programmed directly through the keypad. There is a dedicated
panic zone, monitored siren output, auxiliary power outputs and 5 (expandable to 25) programmable
outputs that may be programmed to perform various trigger/switching functions. These can all be
programmed by your installer.
For correct operation, these Alarm Panels must be used in conjunction with the specified
transformer/battery combination and appropriate peripheral sensors and signalling devices.
Before Operating Your Alarm System
¾ Read the entire manual carefully and keep it in an accessible place.
¾ Note that this is not a DIY product, and your security system should be installed and serviced by
a qualified security professional who should instruct you regarding the level of protection
provided and the operation of the system.
¾ Should you have any questions regarding the operation of the system, contact your installer.
¾ Note that your system should be tested on a regular basis. Before testing the system, please
notify your security company of your intention to do so.
¾ NEVER disconnect the mains power, as the back-up battery will eventually discharge thereby
causing the control panel to shutdown.
¾ Note that a security system cannot prevent emergencies. It is only intended to alert you and (if
applicable) your central monitoring station, of an emergency situation.
¾ Note that smoke and heat detectors may not detect all fire situations.
¾ This manual is not a fully detailed installation manual – the installation manual is only available to
accredited installers.
¾ Note that the performance of your alarm system will to a large extent be determined by the
quality and installation of the detectors attached to your panel.
To Next Page
Loading...
Need help?
General
