Features
1. Auto arm / disarm
a. Per partition
b. By day of week
c. Pre-determined time
d. No movement
2. Four reporting numbers
a. Dual reporting
b. Split reporting
3. Medical Alarm on no movement
4. Maintenance code
a. Siren time and delay
b. Keypad lockout
c. Day light savings
d. No movement auto arm / disarm
e. Auto arm
5. Selectable bypass via user code
6. Dynamic battery test
7. Low battery cut out
8. Improved power supply
9. Programmable zone loop response
10. Up & downloadable via software
11. Fax defeat to bypass fax / answering machines
12. Optional tamper reporting per zone
13. Non-volatile memory
14. Voice reporting and DTMF control
15. Wireless Integration
16. Multi-Language: English, Afrikaans, Portuguese, Spanish, Greek, Italian
This manual incorporates the X16 & X64 alarm panels. References are to both and depending on
the system you are working on will depend on how to interpret the information.
Example: If zones above 16 are mentioned then X64 is being described.
Training must be done with X64 panels as some of the exercises are not suitable for X16.
To Next Page
Loading...
