IDS X64 Training Manual

IDS X Series Training V2.3 | Keypad Key Descriptions
71
Types of Keypads
Liquid Crystal Display Keypad Light Emitting Diode Keypad
(LCD) (LED)
Keypad Key Descriptions
Stay Zones
Allocating zones to
a stay profile
Stay & Go
Arms the system in
Stay and Go Mode
Bypass
Manually bypass
zones
Alarm Memory
Holds violated zone, tamper,
bypassed and event log
information from the last arm
cycle.
Clear / Exit
1. Clears last pressed
key
2. Exit out of menu
1. Used to confirm entry and save
information
2. Hold until beep, enter master
user code, and choose menu
option
3. In dealing with options that have
zone selections, the LED keypad
can only show 16 zones at a
time. To access zones above 16
press the [*] key to page to the
next 16, until the correct page
with the zone is located
Trouble view
Press and hold until
beep
Quick Away arm
Press and hold
until exit delay
begins
Buzz Zones
Allocating zones to a
buzz profile
Menu options
Hold for 3 seconds
and select menu
option
Chime
Allocating zones to
a chime profile
Quick stay
1. Press and hold until stay
armed
2. Press and hold again and
next profile is made active

IDS X64 Specifications

General

Keypads	8
Stay/Away Arming	Yes
Tamper Protection	Yes
Operating System	Proprietary
Supported Protocols	Contact ID, SIA
Power Supply	16.5VAC
Backup Battery	12VDC 7Ah
Alerts	SMS
RAM	Unknown