IDS X64 Training Manual

IDS X Series Training V2.3 | New Partition Menu on LCD keypads
85
Changing between Alphanumeric Mode and LED Simulation Mode
This feature allows a quick look at all zones and what state they are in.
[Mode] [4] [*] [Option] [*]
Zone Restored This larger view shows how to distinguish between a zone that is
not violated or restored and a zone that is violated
Zone Violated
New Partition Menu on LCD keypads
When entering quick arm, stay arm or stay go and the option is enabled all partitions will be shown with
their status
Menu status options:
i. r = ready
ii. n = not ready
iii. E = entry/exit delay
iv. S = stay armed
v. A = away armed LCD Screen
vi. ! = alarm
Note: This option must be enabled under installer settings, location 251 – 258: Keypad
Options
Press and hold
until beep
LED Mode
Menu Option
1= Alphanumeric
2 =LED simulation
Zone 1 to 16
Zone 17 to 32
Zone 33 to 48
Zone 49 to 64
Partitions
Status

IDS X64 Specifications

General

Keypads	8
Stay/Away Arming	Yes
Tamper Protection	Yes
Operating System	Proprietary
Supported Protocols	Contact ID, SIA
Power Supply	16.5VAC
Backup Battery	12VDC 7Ah
Alerts	SMS
RAM	Unknown