p.28
Basic setup
100RV
press .
9 To set or release the quick mode
The QUICK mode is applicable to RF ONLY mode (01) and PIN ONLY mode (03) and RF/PIN
combination mode (05), which enables you to open the door by simply pressing
without the need of the PIN number. (This is useful for the normal business hours when the
door entries and exits occur frequently.)
1. Present the Master Card to the device.
2. Press Button and Button in sequence and press .
• To release the QUICK mode, repeat Step 1 above, select the < > buttons and
press .
• The default is set to “not used”.
10 To set or release the toggle mode for the door relay
In the Toggle mode, the door opens if it is closed or vice versa by presenting a registered
card or entering the PIN.
1. Present the Master Card to the device.
2. Press Button and Button in sequence and press .
• To release the Toggle mode, repeat Step 1 above, select the < > buttons and
press .
• The default is set to “not used”.
To Next Page
