EasyManua.ls Logo

IDTECK 100RV - Other Information; Initial Values

IDTECK 100RV
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Other information
11
p.44
1 Initial values
This product operates in the following initial values:
For changing the settings or registering/deleting the user card, refer to the applicable
section in this document.
1. Entry permitted for a registered card
- The door control relay operates for 3 seconds.
- The green LED indicator fl ashes for 3 seconds.
2. Entry denied for an unregistered card
- The alarm relay operates for 2 seconds.
- The red LED indicator fl ashes for 2 seconds.
3. Duress Mode Password : 00
The TTL output port produces a signal for 3 seconds in Duress mode.
4. QUICK MODE : Disabled
5. Chime Bell Output : Enabled
Chime Bell Operating Time : 0.5 second
6. Melody Sound : Enabled
7. Keypad Input Limited Use : 20 seconds
8. When an input signal is sensed : ‘H’ ‘L’ (common for all inputs)
9. When a TTL output signal is sensed : ‘H L’
10. Patrol Mode Delay Time : 00 minute
11. Door Sensor Sensing Time : 00 second
12. Retry count for an unauthenticated entry : 05 times
13. Alarm for Dismantled Device : Disabled
Dismantled device Alarm Output Port : 02 (Alarm Relay)
14. Toggle Mode : Disabled

Table of Contents