Additional features
100RV
p.41
< > buttons and press .
The default is set to “disabled”.
You can release the alarm for the dismantled device by presenting the Master Card
or a registered card.
3 To check the output specified for a registered card
user
You can check the output setting that you specifi ed in “To specify the output time if the
card is authenticated”. (See page 28.)
1. Present the Master Card to the device.
2. Press Button and Button in sequence and press .
4 To check the output specified for an unregistered card
user
You can check the output setting that you specifi ed in “To specify the output time if the
card is not authenticated”. (See page 29.)
1. Present the Master Card to the device.
2. Press Button and Button and Button .
To Next Page
