IET Labs DE-5000 User Manual

- 12 -
Chapter 2: Operation
2.1. How to obtain optimum precision
To access optimum precision for all
L
,
C
, and
R
measurements,
especially at the highest and the lowest ranges, zero the instrument
before use (pages 16-18).
To secure the specified accuracy, connect the device under test
(DUT) to the measuring socket, or use either TL-21 (standard
accessory) or TL-22 (optional accessory).
If you are using test leads other than the ones specified above, use
4-wire leads and avoid using long lead wires to reduce measurement
errors.
2.2. Default settings
When the power is turned on, the monitor displays all symbols for 2
seconds as shown below.

IET Labs DE-5000 Specifications

General

Brand	IET Labs
Model	DE-5000
Category	Measuring Instruments
Language	English