IET Labs DE-5000 User Manual

- 27 -
To access the Relative mode proceed as follows:
1. Zero the meter. See pages 14-16 for details.
2. Select the parameter to be tested.
L, C, R, or DCR
3. Attach the chosen standard to the test points.
4. Press the
REL%
key.
The meter should now display the ∆ symbol.
5. Remove the standard and attach a DUT to the test
points.
The primary display should show the value of the
DUT and the secondary display should show the %
difference from the standard.
6. Repeat Step 5 for each DUT.
Note: The range for the % difference is -99.9% to
99.9%. If the DUT falls outside that range, the
secondary display will show OL.
7. To exit, press and hold the
REL%
key for
2 seconds.

IET Labs DE-5000 Specifications

General

Brand	IET Labs
Model	DE-5000
Category	Measuring Instruments
Language	English