IET Labs DE-5000 User Manual

- 28 -
Example: In Capacitance mode
Display shows the
measurement reading.
Ex. 669.3 nF
Press REL% key
∆ appears on the screen
The reading on the display is
stored as reference value.
0.0% is shown on the
secondary display since the
measured value and the
reference are the same at this
point.
Remove the standard and
attach a different device
The new reading is shown on
the primary display.
The % difference is shown
on the secondary display.
Remove the current DUT
device under test and insert
another.

IET Labs DE-5000 Specifications

General

Brand	IET Labs
Model	DE-5000
Category	Measuring Instruments
Language	English