IFM Ecomat 300 AC1421 - Page 32

32
ifm Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2 2015-11-30
Operation Page view
>
Meaning of the colour combinations (example: configuration error type 2)
11237
Symbol
Colour
Meaning
grey red
grey
Configuration error type 2:
– Single slave is projected (in LPS) but was not found (in LDS).
– Instead, a new A slave with the same address was installed.
grey
grey red
Configuration error type 2:
– Single slave is projected (in LPS) but was not found (in LDS).
– Instead, a new B slave with the same address was installed.
grey red
Configuration error type 2:
– A or B slave is projected (in LPS) but was not found (in LDS).
– Instead, a new single slave with the same address was installed.