83
ifm Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2 2015-11-30
Menu System
>
Adopt the system time of the PC
15756
This function can only be executed via the web interface of the device.
To adopt the date and time of a PC/laptop:
1 Go to the web interface of the device
► Connect the PC/laptop to the configuration interface (X3) of the device.
► Start the web browser and access the web interface of the device.
2 Select the menu page
► >
► Select the [Clock] tab.
3 Adopt the system time of the PC/laptop
► Uncheck [Activate NTP] (→ Set the system time (→ page 80)).
► In group [Apply Time and Date from the PC] press [OK].
> The device applies the date and time of the PC/laptop.
> [Date] and [Time] display the system time.
To Next Page
