IFM LR8000 - 11�5 Output Response in Different Operating States; Technical Data and Scale Drawing; 12�1 Setting Ranges

39
11.5 Output response in different operating states
OUT1��� OUT4
Initialisation OFF
Normal operation
according to the level and the setting of the output function
(bin, OU1���OU4)
Fault (E�0xx)
OFF for FOUx = OFF;
ON for FOUx = on
cm inch
min max min max
L (probe length) 10 160 4�0 63
A (active zone) 6 (4) L - 4 (L - 6) 2�4 (1�6) L - 1�6 (L - 2�4)
I1 (inactive zone 1) 3 1�2
I2 (inactive zone 2) 1 (3) 0�4 (1�2)
The values in brackets apply to the setting [MEdI] = [LOW] (setting for the detection of oils
and oil-based media)�
12 Technical data and scale drawing
Technical data and scale drawing at www�ifm�com�
12.1 Setting ranges
[LEnG] cm inch
Setting range 10���160 4�0���63
Step increment 0�5 0�2
[OFS] cm inch
Setting range 0���100 0���39�4
Step increment 0�5 0�2