IFM O1D120 - Operating and Display Elements; Element Identification

9
UK
7 Operating and display elements
1: 4 x LED green Lighting LED = power and set display unit (mm, m, inch)
2: 4 x LED yellow
(two not
connected)
Indication of the switching status; lights, if the corresponding
output is switched�
3: 4-digit
alphanumeric
display
Indication of the measured distance, the parameters and
parameter values�
4: Programming
button
[SET]
Setting of the parameter values (scrolling by holding pressed;
incrementally by pressing once)�
5: Programming
button
[MODE/ENTER]
Selection of the parameters and acknowledgement of the
parameter values�