English
16
“momentary” or “sustain pedal” type foot switch that includes a 1/4 inch connector. Both normally open and
normally closed switches are supported. AXE IO also support continuous expression pedals for controlling
realtime parameters like Wah, Volume, FX depth etc. Any 1/4” TRS connector expression pedal will work with
AXE IO. MIDI messages associated with these controllers are freely assignable from the “Control app”.
2.7 Preset browsing
1
2
By default this control is setup to directly control presets browsing on AmpliTube, however the MIDI CC that are
assigned to this control can be freely assigned to make it useful for other type of controls by using the “Control
App”.
Of course, by doing so, you will no longer be able to browse AmpliTube presets.
Default MIDI CC# are:
Rotation -> CC#22 Relative mode
Push -> CC#23
To load a preset in AmpliTube:
PUSH
To Next Page
Loading...
