IK Multimedia AXE I/O User Manual

English
20
5 Connecting instruments
INSTRUMENT
IN
Connect your guitars, basses or any other mono instruments to the instrument inputs on AXE I/O using an 1⁄4”
plug unbalanced (TS or “mono”) guitar cable.
Please refer to Section 2 of this manual for the complete description of features dedicated to the instrument
input.
6 Connecting loudspeakers and headphones
The 1/4” jack outputs 1/L and 2/R on the rear panel will normally be used to drive monitoring speakers. Self-
powered (active) monitors incorporate internal amplifiers, and may be connected directly. Passive loudspeakers

IK Multimedia AXE I/O Specifications

General

Type	Audio Interface
Number of Channels	2
Connectivity	USB
MIDI I/O	In/Out
Sample Rate	Up to 192 kHz
Resolution	24-bit
USB	USB 2.0
OS Requirements - PC	Windows 10 or later
Form Factor	Desktop
Z-Tone Impedance Circuit	Yes
Direct Monitoring	Yes
Phantom Power	Yes
Software Included	T-RackS 5
OS Requirements - Mac	macOS 10.13 or later
Dimensions	8.5 x 5.5 x 2.1 inches