English
11
The LIVE section will appear in the preset (default) mode:
In this mode, the 4 footswitches send Program Change (PC) messages in bank of four (e.g.: from 0 to 3). By
pressing and holding the footswitch 2 for more than 1 second the bank increase of 1. Now the 4 footswitches
send PC messages increased of one bank (e.g: from 4 to 7). By pressing and holding the footswitch 1 for more
than 1 second the bank decrease of 1. Now the 4 footswitches send PC messages decreased of one bank (e.g.:
they’ll return to send PC 0 to 3). The banks can be increased until reach PC 127.
Each time a bank up/down is performer all the 4 LED of the footswitches turn on in sequence (from 1 to 4 in
case of a bank up; from 4 to 1 in case of a bank down).
This mode is particularly useful to navigate among the AmpliTube presets.
Switch 1 Switch 2 Switch 3 Switch 4 Virtual
Switch
Pedal
When
released
send
Bank PC A Bank PC B Bank PC C Bank PC D CC#26 –
toggle mode
CC#11
When hold
for >1 sec
send
Bank Down –
CC#25
Bank Up –
CC#24
Tuner ON/OFF
CC#32
Tap tempo --- ---
MIDI CH 1
To Next Page
Loading...
