IK Multimedia iRig Stomp I/O User Manual

English
12
3.3 Stomp mode
Switch combination Function MIDI message sent
Pressing Switch 3+4 >1sec. Stomp Mode/Preset Mode CC#39 val 127
MIDI CH 1
The iRig Stomp I/O has two main modes: Preset and Stomp. To switch between the two, simply press
simultaneously footswitches 3 and 4 for more than 1 second. When in Stomp mode, the LED on the top panel
will light up red.
Launch AmpliTube and tap on the LIVE section. Switch to Stomp Mode by pressing the switch simultaneously
switches 3 and 4: the LIVE section will turn in Stomp Mode.
In this mode, the 4 footswitches send MIDI Control Change (CC) messages in order to switch on/off stomps in
the AmpliTube path. Changing presets one by one is also possible by holding footswitch 1 or 2.
Switch 1 Switch 2 Switch 3 Switch 4 Virtual
Switch
Pedal
When
released
send
CC#20 -
toggle mode
CC#21 -
toggle mode
CC#22 - toggle
mode
CC#23 -
toggle mode
CC#26 –
toggle mode
CC#11
When hold
for >1 sec
send
Preset Down
– CC#91
Preset Up –
CC#90
Tuner ON/OFF
CC#32
Tap tempo --- ---
MIDI CH 1

IK Multimedia iRig Stomp I/O Specifications

General

Brand	IK Multimedia
Model	iRig Stomp I/O
Category	Music Pedal
Language	English