IK Multimedia StealthPedal CS - Page 35

3 - Setups and Connections
33
StealthPedal
™
CS
External Expression Pedal
You can connect an external Expression Pedal to the Expression Pedal 1/4”
TRS Jack (figure 3.9).
figure 3.9
Note: You may use a third-party Expression Pedal or the one available
for purchase from IK Multimedia, made specifically for use with your
StealthPedal (figure 3.10).
figure 3.10
Be sure to use a 1/4” TRS cable (or “stereo” jack) when connecting the
Expression Pedal to StealthPedal. A conveniently short 1/4” TRS cable is includ-
ed in the box with the Expression Pedal you can purchase from IK Multimedia.
WARNING: do NOT connect an Expression Pedal with a TS cable (or “mono” jack).
Connecting an Expression Pedal with a TS cable (or “mono” jack) will NOT work.